compressor delivery造句

The rotor cooling bleed air is extracted from compressor delivery and passes along narrow passageways before being injected into the base of the rotating blades.
However, better turbine materials and / or improved vane / blade cooling are required to cope with increases in both turbine inlet temperature and compressor delivery temperature.
However, better turbine materials and / or improved vane / blade cooling are required to cope with increases in both turbine rotor inlet temperature and compressor delivery temperature.
If the latter is held constant, the increase in ( HP ) compressor delivery temperature ( from raising overall pressure ratio ) implies an increase in HP mechanical speed.
At even higher intake temperatures, a limit on compressor delivery temperature ( " T " 3 ) is invoked, which decreases both SOT and corrected flow.
It's difficult to find compressor delivery in a sentence. 用compressor delivery造句挺难的

According to simple theory, if the ratio of turbine rotor inlet temperature / ( HP ) compressor delivery temperature is maintained, the HP turbine throat area can be retained.
One main advantage of pre-cooling is that, for a given overall pressure ratio, there is a significant reduction in compressor delivery temperature ( T3 ), which delays the onset of the T3 limit as flight speed increases.
Now further reducing the flow ( to { \ dot { m } } _ C and { \ dot { m } } _ S ), the increased pressures in the delivery pipe are again matched by the compressor delivery pressures at C and S on the characteristic curve.
On the characteristic curve at the flow rates below AS provides lower pressure as seen in the fig . at D and E . But now the pipe pressures due to further reduction of flow by valve ( let at point D ) will be higher than the pressure at D and E . This unbalance between the pipe pressure and the compressor delivery pressure only exist for a very short time.